Scanner locked, release lock under scanner
1 Unlock the scan bar.
2 Touch Continue to clear the message and continue scanning.
Scanner maintenance required soon, use ADF Kit [80]
Contact customer support, and then report the message. The printer is scheduled for maintenance.
Serial option [x] error [54]
Try one or more of the following:
• From the scanner control panel, touch Continue to continue printing.
• Check that the serial cable is properly connected and is the correct one for the serial port.
• Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the scanner
and on the computer.
• Turn off the scanner, and then turn it back on.
Serial port [x] disabled [56]
Try one or more of the following:
• From the scanner control panel, touch Continue to clear the message.
The scanner discards any data received through the specified serial port.
• Make sure Serial Buffer is not set to Disabled.
• From the scanner control panel, set Serial Buffer to Auto in the Serial [x] menu.
Some held jobs were not restored
From the scanner control panel, touch Continue to delete the indicated job.
Troubleshooting 306
