Personality
This printer features automatic personality (printer language) switching.
•
AUTO configures the printer to automatically detect the type of print job and configure
its personality to accommodate that job.
•
PCL configures the printer to use Printer Control Language.
•
PS configures the printer to use PostScript emulation.
To set the personality
1. Press to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight PERSONALITY.
7. Press
to select PERSONALITY.
8. Press
or to select the appropriate personality (AUTO, PS, PCL).
9. Press
to set the personality.
10. Press P
AUSE/RESUME.
Clearable warnings
You can determine the display time of control panel clearable warnings with this option by
selecting ON or JOB. The default value is JOB.
•
ON displays clearable warnings until you p ress .
•
JOB displays clearable warnings until the end of the job in which it was generated.
To set the clearable warnings
1. Press to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight clearable_warnings.
7. Press
to select clearable_warnings.
8. Press
or to select the appropriate setting.
9. Press
to set the selection.
10. Press P
AUSE/RESUME.
40 Chapter 2 Control panel EN_WW
