A SERVICE OF

logo

C
L
OADING
S
OFTWARE
T
HROUGH
L
OCAL
A
CCESS
This appendix describes how to load a new software release into the VCN
AP through the LMA port.
Loading software requires using a PC in terminal emulation mode. Refer
to Appendix E
Terminal Emulation Settings for a description of terminal
emulation procedures.
To load software into an VCN AP, perform the following steps:
1
Attach your terminal emulating PC to the LMA port on the VCN AP.
2
Press any key to view the VCN AP Main Menu on the terminal screen. If
another menu appears, press 0 (zero) and ENTER repeatedly until the
Main Menu appears.
3
In the Main Menu (Figure 62
) type 3, and press ENTER.