A SERVICE OF

logo

Open as PDF
next previous
Operating the VCN Access Point 35
Figure 26
Communications Access via the VCN AP
Operating the VCN
Access Point
After the installing and mounting the VCN Access Point it is ready for use.
The VCN AP may be used for the following:
■
Making a Voice Call
■
Sending and Receiving Data Traffic
■
Sending and Receiving Faxes
Making a Voice Call
You can make a voice call without connecting the VCN AP to power or to
any front panel connection.
To place a voice call:
1
Check that the telephone port is connected to a telephone set and the
LINE port on the rear of the VCN AP is connected to the wall telephone
socket.
2
Use the telephone set as if it were connected directly to the wall socket.
Fax-Modem
ETHERNET
Line
P
ower
3
c
o
m
VCN
Access Point
VCN Access
Concentrator
Punch-Down Blocks
24 wire pairs
24 wire pairs
24 wire pairs
Basement
ISP / INTERNET
NSP / PSTN
Room
PBX
24 wire pairs
24Ports Concentrator
3C10BSO24OA-C
1
2
3456789
10111213 14151617 18192021 222324
LINE
LAN
POWER
3
Com