A SERVICE OF

logo

Open as PDF
next previous
Installing the VCN Access Point 29
Figure 18
Removing Curved Cover
All three holes in the VCN AP are plugged.
3
Remove the plugs from the two large holes by prying them out with the
tip of your screwdriver.
4
Remove the plug from the small front hole by forcing it out from the
bottom with a pointy instrument (for example, a nail).
5
Where the crosshairs of the template holes intersect, indent the surface
with a sharp tool (for example, a nail).
6
Remove the template. See Figure 17
.
Fax-ModemETHERNET
Line
Power
S
crew hole