52 C
HAPTER
4: U
SING
THE
L
OCAL
M
ANAGEMENT
A
CCESS
To reject, press <Enter> or type
n
and press <Enter>. The
Management
Menu
reappears.
To proceed type
y
and press <Enter>; the message appears:
The system is going down...
The
Operation Mode Selector Menu
(Figure 44) appears.
Figure 44
Operation Mode Selector Menu
If this menu is ignored for 5 seconds, execution from the flash begins and
the messages in Figure 45
through Figure 47 appear. This is the default
option
F
.
Option
C
is for entering the MAC address. This is normally performed in
the factory.
Option
D
is for debugging. This option is for developers only.
Option
S
is for downloading software through the LMA port. For more
information see Appendix C
Loading Software Through Local Access.
To use an option, type its letter.
To continue with the reset operation without performing the other
options, do one the followin steps:
■
Wait 5 seconds.
********************************************************
3Com NCD. (C)
10Base-S Boot loader V2.00
Date: Jun 15 1999, Time: 16:13:31
CPE modem Operation Mode Selector.
Enter:
S - for Serial loading OR
D - for Debug operation OR
F - for SW execution from the Flash OR
C - for MAC address programming.
********************************************************
