36 C
HAPTER
3: I
NSTALLING
AND
O
PERATING
THE
VCN A
CCESS
P
OINT
3
If the telephone set has an additional RJ-11 port, it can be used
independently of the VCN AP for fax. Connect an RJ-11 cable between
the fax machine or the PC fax modem to the PC RJ-11 port on the VCN
AP.
Sending and
Receiving Data Traffic
To send or receive data traffic:
1
Connect a RJ-45 cable between the Ethernet port and the PC Ethernet
card.
NOTE: No password or account number specific to the local ISP is
needed, however, your normal log-in procedure should be observed,
including access privileges like user ID, password, etc.
2
Run your network application: browser, e-mail etc.
Sending and
Receiving Faxes
You can make a fax call without connecting the VCN AP to power.
To send or receive faxes:
1
Connect a RJ-11 cable between the fax machine or the PC fax modem
and the VCN AP Fax-Modem port.
2
Use the fax machine and the telephone set in accordance with the fax
machine user manual.
3
If the telephone set has an additional RJ-11 port, it can be used
independently of the VCN AP for fax or modem. Connect an RJ-11 cable
between the fax machine or the PC fax modem to the PC RJ-11 port.
