50 C
HAPTER
4: U
SING
THE
L
OCAL
M
ANAGEMENT
A
CCESS
Figure 41
HDLC Status Screen
Change HDLC Work Mode
To change the HDLC loopback mode, use the
Change Work Mode Menu
.
In the
HDLC Menu
, type
4
and press <Enter>. The options in Figure 42
appear.
Figure 42
Change HDLC Work Mode Menu
In the
Change Work Mode Menu
, the current working mode is shown to
be one of:
■
Normal Operation
Normal operation is lack of loopbacks.
■
Internal Loopback Mode
Setting Internal Loopback Mode
To set internal loopback mode, type
2
and press <Enter>. The message
appears:
This action will change the working mode of HDLC!
HDLC Status
------------
Scc channel numbers - 3
Work Mode - normal mode
Transmit enable - yes
Receive Enable - yes
Maximum length of rx frame- 1518
press <Enter> to continue...
Current Working Mode of HDLC: Normal Operation
1. Set Normal Mode
2. Set Internal Loopback Mode
0. Return to Previous Menu
Please enter your choice:
