set ip ssh server 145
Examples — The following command changes the idle timeout value to
20 minutes:
WX4400# set ip ssh idle-timeout 20
success: idle timeout set to 20 minutes
See Also
■ “set ip ssh” on page 143
■ “set ip ssh absolute-timeout” on page 143
■ “set ip ssh server” on page 145
set ip ssh server Disables or reenables the SSH server on a wireless LAN switch.
CAUTION: If you disable the SSH server, SSH access to the WX switch is
also disabled.
Syntax —
set ip ssh server {enable | disable}
■ enable — Enables the SSH server.
■ disable — Disables the SSH server.
Default — The SSH server is enabled by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You must generate an SSH encryption key to use SSH.
The maximum number of SSH sessions supported on a WX switch is
eight. If Telnet is also enabled, the WX switch can have up to eight Telnet
or SSH sessions, in any combination, and one Console session.
See Also
■ “crypto generate key” on page 392
■ “set ip ssh” on page 143
■ “set ip ssh absolute-timeout” on page 143
■ “set ip ssh idle-timeout” on page 144
