Filter
Top Products
In the advanced setup menu, you can set basic operations
of this unit, such as on and off of a bi-amp connection, or
initialize user settings.
1 Set this unit to standby.
2
While holding down (_)STRAIGHT on the
front panel, press @MAIN ZONE ON/OFF.
Keep holding down _)STRAIGHT until
"ADVANCED SETUP" appears on the front panel
display.
: : :,," ,=, : : : : %,' :,,,, :,," ...., :,,,, : %,' :
3
Rotate the @PROGRAM selector to select
the parameter you want to change.
The default setting are marked with "*"
_%,-_
• Sel values are placed inXXX ollhe lollowing parameters on an
aclual display screen.
.,- :.. ,:, :.,: :.-, : ,::, ,::,,:
2:V i. MI"= --:.'..'..'=
Choices: 6f_MIN,8f_MIN*
Selects output impedance of this unit according to
connected speakers. When you connect 4-ohm
speakers to the FRONT speaker terminals, set "SP
IMP." to "6QMIN.".
!:;i:E!'!0! E !i[) ....::.:;::.:;::.:;
Choices: IDI*, ID2
Sets a remote control ID. When using multiple
Yamaha AV receivers, you can operate them with a
single remote control by setting the receive]- IDs to
the same setting.
: :: ::::.: .,,,.,,,.,,,
.,.,:., : ,:,: : : :: :: :
Choices: RESET,CANCEL*
Resets Parental lock cord when using SIRIUS
Satellite tune]'.
E:!i !::!!'!F..... ::.:;::.:;::.:;
Choices: ON, OFF*
Switches on and off of bi-amp connection of main
speakers. For bi-amp connection, see page 12.
.,-,.,-,:.-,: ::.... :, :.-, : :: :: :
i:::=!...i:2H 1:2 .[ i'=:i ....,:':=,:':=,:':=
Choices: ON*, OFF
Selects whether or not to transmit the control signals
to an external component connected to the REMOTE
OUT jack on this unit when BD/DVD or CD SCENE
function is selected.
i'.'h":i, i :"'i ii." :.,=:,,=:,,=:,,=
: =.,.,: = :: .,.,: =: ,, : =: =: =: =
Choices: YES*, SKIP
Adds upscaling limitation on output signals to a video
monitor connected to this unit via the HDMI OUT
jack.
4
T i, i T 'T" :.,=:.,=:,,=:, ,=:,,=:,,=:,,=:,,=:,,=
! !',! ! ! "-" .,'.,.,'.,.,'.,.,'.,.,'..,'..,'..,'..,'.,
Choices: DSP PARAM, VIDEO, ALL, CANCEL*
Initializes various settings stored in this unit. You can
select an initialization method from the following.
DSP PARAM: All parameters of sound field
programs
VIDEO Video conversion settings (resolution/
aspect) inthe Setup menu and the GUI
display position
ALL All
CANCEL Cancellation of initialization
Press _)STRAIGHT repeatedly to change
the selected parameter setting.
To change other settings, repeat steps 3 and 4.
Press @MAIN ZONE ON/OFF to set this
unit to standby.
The settings you made are reflected next time you
turn on this unit.
You can check the firmware of this unit and update the
firmware using the USB port on the front panel.
Select the following parameter in step 3 above.
:,., ,:. :,-,:,,= : =:,-,:,., .,..,:.,:,.,
i'- i i'1"i11 i ii'-'i ii,.i i i"
: ,:,1.,1 = .,.,: 1,.,1 =: 1,.,
Updates the firmware of this unit. To update the firmware,
select "FIRM UPDATE" and then press (_)STRAIGHT.
• Do not use this feature unless you need to updale the firmware.
• Be sure to read informalion supplied vvri|hupdates belk)re updatillg Ihe
_]rmware.
i i r- i"11, ,11,,11,,1 1,,11,,11,,1 1,,11,,11,,1
:..,=E:.r=:.:.'.=:.'.=:.'.=:: :.'.=:.'.=:.'.=:: :.'.=:.'.=:.'.=
Displays the firmware of this unit.
Setting a remote control ID
Two IDs are provided for the remote control of this unit. If
another Yamaha amplifier is in the same room, setting a
different remote control ID to this unit prevents unwanted
operation of the other amplifier.
"IDI" is set for both the main unit and remote control by
default. If you have changed the remote control ID, make
sure that you select the same ID for the main unit in the
the advanced setup menu.
Press _CODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
[_TRANSMIT blinks twice.
2 Press [_ON SCREEN.
64 En