Filter
Top Products
Registering input source/sound field
program
Select the desired input source/sound field
program and then press and hold @SCENE (or
®SCENE) key to edit until "SET Complete"
appears on the front panel display.
--'4'--
• lfyou change the input source setting, register the remote control code of
an external component to the input source (page 63).
Category Input source
Select Media USB, DOCK, SIRIUS, XM,
TUNER, PHONO, V-AUX,
MULTI CH
Select Input HDMII-4, AVI-6, AUDIOI/2
-4'--
• lfan input source you want to select is available in "Select Scene", you
can select the desired input source and sound field program at once.
3 Press _]ENTER.
1 Press N]MUTE on the remote control to mute
the audio output.
The MUTE indicator on the front panel display
flashes while audio output is muted.
components linked to scene selections
You can operate an external component with the remote
control of this unit by setting a remote control code for the
external component for each input source. Setting remote
control codes for desired input sources allows you to
switch between external components linked to scene
selections.
1 Register the remote control code of an
external component to the desired input
source (page 63).
2 Press N]MUTE again to resume audio
output.
2
• This feature is not available forTUNER, SIRIUS and XM input
SOtlrces.
While holding down the desired _SCENE
key, press and hold the _lnput selection
key to which you registered a remote control
code in step 1.
From now on the external component can be remotely
controllable just by selecting a scene,
You can adjust the balance of the high frequency range
(Treble) and low frequency range (Bass) of sounds output
from the front left and right speakers to obtain desired
tone.
Press @TONE CONTROL on the front panel
repeatedly to select "Treble" or "Bass".
The current setting is displayed on the front panel
display.
Press [_ON SCREEN on the remote control.
The GUI screen appears on the video monitor.
'rr.:iiii:::,i :iii ::..::-..::,::..::-..::...,....:::,_:.-.
2
Rotate the @PROGRAM selector to adjust
the frequency range.
Control range: -10.0 dB to +10.0 dB
The display returns to the previous screen
automatically in few seconds,
2 Use _Cursor A / V repeatedly to switch the
page and _Cursor <1/ i> repeatedly to
select the desired input source.
Category Input source
Select Scene BD/DVD, TV, CD, RADIO
• The tone control settings are not efli_ctive when this unit is in the Pure
Direct mode or "MULTI CH" is selected as an input source.
• If you set the balance extremely off, sounds may not match those from
other channels well.
Use Pure Direct mode to enjoy the pure high fidelity I
sound of the selected source. When Pure Direct mode is
I
activated, this unit plays back the selected source with the
least circuitry.
23 En