Filter
Top Products
|¶,lllll_"l(|qll _
• Audio player
Output jacks on the connected external component
External component Output jack
External component v,,ith optical digital Optical digital output
output
External component with coaxM digital
output
External component with analog audio
output
Coaxial digital output
Analog audio output
In
Input source
AV 1 (TV)
AV4
AV2
AV 3 (CD)
AV5
AV6
AUDIO 1
AUDIO 2
PHONO
Turntable Analog audio output
"4'--
• We recommend connecting the coaxial digital output terminal of a CD player to the AV3 jack.
mt sources/jacks of this unit
Input jack
OPTICAL
OPTICAL
COAXIAL
COAXIAL
Analog audio
Analog audio
Analog audio
Analog audio
Analog audio
• When connecting a turntable with a low-output MC cartridge to the PHONO ,jacks. use an inqine boosting transformer or MCq_ead amplifier.
• Connect your turntable to the GND terminal of this unit to reduce noise in the signal.
About audio/video output terminals
Among the analog audio and analog video signals input to this unit via input terminals, the audio/video signals of the
selected input sources are output from the AV OUT jacks and AUDIO OUT jacks. An HDMI input signal,
COMPONENT VIDEO input signal or digital audio input signal cannot be output.
When using the AV OUT jacks: connect an external component to the VIDEO or analog audio terminal.
When using the AUDIO OUT jacks: connect an external component to the analog audio terminal.
• Connecting a multi-format player or an
external decoder
This unit is equipped with 8 additional input jacks (Front
L/R, Center, Surround L/R, Surround Back L/R and
Subwoofer) for analog multi-channel input from a multi-
format player, external decoder, etc.
• When you select "MULTI CH" as the input source, the digital sound field
processor is automatically disabled.
• Since this unit does not redirect signals input at the MULTI CH INPUT
jacks to accommodate for missing speakers, connect at least a 5.1=
channel speaker system when using this li_atm'e.
• You can specify a video signal to be output during a multi-channel audio
reproduction (page 49). If your DVD player has analog multi-channel
output jacks, connect them to the MULTI CH INPUT jacks while making
a video connection (component video or composite).
Multi-format player or external decoder
(7.1-channel output)
• Connecting an external amplifier
If you want to use another amplifier, connect an external
amplifier to the PRE OUT jacks. Each PRE OUT jack
outputs the same channel signals as the corresponding
speaker terminals.
• When you make connections to the PRE OUT jacks, do not make any
connections to the speaker terminals.
@ FRONT PRE OUT jacks
Front channel output jacks.
@ SURROUND PRE OUT jacks
Surround channel output jacks.
@ SUN.BACK PRE OUT jacks
Surround back output jacks. When you only connect one
external anaplifier I_r the surround back channel, connect it to
the left SUN.BACK (SINGLE)jack.
--'4'--
• To output surround back channel signals at these jacks, set
"Sun'ound Speaker" to any parameter except "None" (page 56).
@ CENTER PRE OUT jack
Center channel output jack.
(_) SUBWOOFER PRE OUT 112 jack
Connect :l sub'a, oofer "a,ith a built-in amplifier.
16 En