Filter
Top Products
You can connect a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of
this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without
wiring between this unit and the Bluetooth component. You need to perform "Pairing" the connected Bluetooth wireless
audio receiver and your Bluetooth component in advance.
• This unit supports A2DP {Advanced Audin Distribulion Profile) ollhe Bluetoolh profile.
"Pairing" refers to the operation of registering a Bluetooth
component for Bluetooth communications. Pairing must
be performed when using aBluetooth component with the
Bluetooth wireless audio receiver connected to this unit
for the first time or if the pairing data has been deleted.
-4'--
• Ynu only need the pairing operation lor the first time thai you use the
Bluetooth component with the Bluetnoth wireless audio receiver.
• Pairing requires operatinns on this unit and on the other component with
which Bluetooth communications are to be established. If necessary,
relbr to the other component's operating instructions.
• Pairing the Bluetooth TM wireless audio
receiver and your Bluetooth TM component
To ensure security, a time limit of 8 minutes is set for
the pairing operation. You are recommended to read
and fully understand all the instructions before starting.
1 Rotate the (_INPUT selector (or press
[]DOCK) to select "BLUETOOTH" (DOCK)
as the input source.
2 Turn on the Bluetooth component you want
to pair with and set it to pairing mode.
For details on operation of the Bluetooth component,
refer to the manual supplied with it.
Press [_OPTION on the remote control.
The Option menu for "BLUETOOTH" is displayed
(page 47).
Press _Cursor V to select "Pairing" and
then press _ENTER.
"Searching" appears and the pairing operation starts.
-4'--
• To cancel pairing, press {_RE'rURN.
• You can also start pairing operation by holding down
(g)MEMORY on the front panel.
Make sure the Bluetooth component
recognizes the Bluetooth wireless audio
receiver.
If the Bluetooth component detects the Bluetooth
wireless audio receiver, "YBA-10 YAMAHA"
(example) appears in the Bluetooth device list.
6 Select the Bluetooth wireless audio receiver
in the Bluetooth device list, and enter a pass
key "0000" into the Bluetooth component.
When pairing is complete, "Completed" appears on
the front panel display.
-4'--
• The Yamaha Bluetnnth wireless audio receiver can be paired with up to
eight Bluetooth components. When pairing is conducted successlully
with aninth component anti the pairing data is registered, the pairing data
for the least recently used other component is cleared.
1 Rotate the (_INPUT selector (or press
[]DOCK) to select "BLUETOOTH" (DOCK)
as the input source.
2 Press [_OPTION on the remote control.
3 Press _Cursor V to select "Connect" and
then press _ENTER.
After you execute "Connect", communication with
the Bluetooth component isestablished. When the
connected Bluetooth wireless audio receiver
recognizes the Bluetooth component, "BT
Connected" appears on the front panel display.
-4'--
• When yon press _ENTER on the remote control, the connected
Bluetnoth wireless audio receiver searches and connects to the last
connected Bluetooth component. If the Bluetnofl_ wireless audio
receiver cannot find the Bluetnnth component, "Not found"
appears on the front panel display.
• Tn disconnect the Bluetooth wireless audio receiver fl'om the
Bluetnoth component, display the Option menu again, select
"Disconnect" anti then press [_ENTER.
4 Start playback of the Bluetooth component.
44 En