Filter
Top Products
You can control external components for a selected input source with the remote control. The keys available for
controlling external components are as follows:
[]SOURCE POWER
Turns on and off an external component.
[Cursor, ENTER, RETURN
Operates the menus of external components.
[_External component operation keys
Function as a recording or playback key of an external
component, or a menu display key.
[]Numeric keys
Functkm as numeric keys of an external component.
[TV control keys
INPUT Switches visual inputs of TV
MUTE Mutes audio of TV
TV VOL +/- Controls the volume of TV
TV CH +/- Switches channels of TV
POWER Turns on and off TV
[_DISPLAY
Switches between the screens of external components.
"4':
• You can use {_TV control keys only for controls nf TV regardless
nf selected input sources.
• You need to set the remote cnntrol cnde first to control external
components.
• The remote control keys lor comrolling external compnnems are
available nnly when tile external components have corresponding control
keys.
The following remote control codes are assigned to input
sources as factory default settings. For a complete list of
available remote control codes, refer to "List of remote
control codes" at the end of this manual.
• Default remote control code settings
Default
Input source Category Manufacturer
code
[HDMI 1] Blu-ray Disc Yamaha 2018
[HDMI2]
[HDMI 3]
[HDMI 4]
[AV11
[AV21
[AV 3] CD Yamaha 5013
IAV4]
IAV51
[AV61
IAUDIO 1]
[AUDIO2]
[V-AUXI
[PHONO]
Default
Input source Category Manufacturer
code
[USB]
[DOCK] DOCK Yamaha 5011
[TUNER] Tuner Yamaha 5007
[SIRIUS1 Tuner Yamaha 5017
[XM] Tuner Yamaha 5009
[MULTI]
.... indicates no assignment
-4':
• An external component cnntrolled by the remote control is automatically
selected according to selection nf tile scenes (page 22).
You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to "List of remote
control codes" at the end of this manual.
You should perform each step within 1 minute after the
previous step.
Press [CODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
[]TRANSMIT blinks twice.
2 Press the desired _lnput selection key.
3 Press [Numeric keys to enter a remote
control code.
Once the remote control code is registered,
[I_TRANSMIT blinks twice. If it fails,
[]TRANSMIT blinks six times. Repeat from
step 1.
You can reset all remote control codes to the factory
default settings.
Press [CODE SET on the remote control
using a pointed object such as a tip of a
ballpoint pen.
[]TRANSMIT blinks twice.
2 Press []ON SCREEN.
3
Press []Numeric keys to enter "9981" I
Once the initialization is complete, I_]TRANSMIT
I
blinks twice. If it fails, [I_TRANSMIT blinks six
times. Repeat from step 1.
63 En