Filter
Top Products
v_
RX-V1065
Additional feature
Now you can select the video to be output when "AUDIOI" or "AUDIO2" is selected as the input source.
For example, if you want to use an external component with analog audio and component video (or composite) output
jacks; connect the analog audio output jacks of the external component to the AUDIO 1or AUDIO 2 jacks of this unit
while making a video connection (component video or composite).
Then follow the procedure below to select the video to be output when "AUDIOI" or "AUDIO2" is selected as the input
source.
1 Rotate the _INPUT selector (or press
[]AUDIO 1 or []AUDIO 2) to select
"AUDIO1" or "AUDIO2" as the input source.
2 Press []OPTION on the remote control.
The Option menu for "AUDIO I" or "AUDIO2" is
displayed.
3 Press []Cursor A / g to select "Video Out"
and then press []ENTER.
I--I I I T_ T UI
FI I__ ±t -- U I
== _ • _ =", ,,,, ,,,,,
,ii !i "! :"i=2:;:":;: ;: ;: ;: ;: ;: E!+" +" ii'
=," =:, %,; %, %,' %,' == == .
4 Press []Cursor <1/_> to select a video input
jack to be used when "AUDIO1" or "AUDIO2"
is selected as the input source and then
press []ENTER.
- AV1-2 (COMPONENT VIDE())
-AV3-6 (VIDEO)
- V-AUX (VIDEO)
- Off (no video output)
_%,._
• "OIT' is selected by de[hult.
5 To exit the Option menu, press []OPTION.