Filter
Top Products
79
Troubleshooting
Symptom
Cause
Solution
STATUS LED is
blinking.
The PJP-MC24 is
malfunctioning.
Initialize the PJP-MC24 (page 84), and
recongure its settings.
STATUS LED is
lighted.
There is a connection problem. • Confirm that there is no connection
problem, and the IP Keepalive settings
are properly congured (page 29).
• The STATUS LED lights if the PJP-MC24
fails to connect to even one IP Keepalive
recipient address.
There is a connection
problem, but the
STATUS LED does
not light.
IP Keepalive has not been set. Congure the IP Keepalive settings
(page 29).
The IP Keepalive function does
not detect a connection
problem.
Wait for a few minutes, and check the
STATUS LED again.
When LEDs are off or blinking
(continued)
Q1