Filter
Top Products
76
Performing Device Maintenance
4.Log in.
1
Turn the PJP-MC24 off.
2
Use a serial cable to connect the
PJP-MC24 CONSOLE port and a PC
serial port.
For information on PC settings and connection,
see page 74.
3
Start a terminal software program on
the PC.
See the previous page for details.
4
Turn the PJP-MC24 on.
The PC terminal software displays the PJP-
MC24 ROM version and waits for you to press
the Enter key.
5
Press the Enter key.
The Password: box appears.
6
Press the Enter key.
If a > is displayed you can enter console
commands.
7
Type “administrator” and press the
Enter key.
8
When the Password: box appears, type
the administrator password.
When # appears, you can change the settings
of the PJP-MC24 using console commands.
9
Enter console commands to set desired
items.
10
When all items have been set, type “save”
and then press the Enter key.
The settings you just made with console
commands are saved to the PJP-MC24's
memory.
11
To end the settings, type “quit” and then
press the Enter key.
Changing Settings from the CONSOLE Port
(Continued)