Filter
Top Products
77
English
SYSTEM OPTIONS
ADVANCED
OPERATION
■ Display (Display)
Use this feature to adjust the on-screen and front panel
displays.
Manual Setup > Option > Display >
Wall Paper (Wallpaper)
Use this feature to select the background when no image is
input from an external source. If you do not want to
display the background, select None.
Choices: None, 1(DSP-Z9), 2(Horn), 3(Piano), 4(Gray)
When Processor is set to Off in the Manual Setup menu, no
background is displayed even if no image is input.
Position (Position)
Use to adjust the vertical and horizontal position of the
GUI display.
Choices: +5 (downward/left) to –5 (upward/right)
•Press k to raise the position of the GUI display.
•Press n to lower the position of the GUI display.
•Press h to shift the position of the GUI display to the
right.
•Press l to shift the position of the GUI display to the
left.
On Screen (Text OSD on/off)
Use this feature to turn on/off the text information on-
screen display.
Choices: Off, On
• Select Off to turn off the text information OSD.
• Select On to turn on the text information OSD.
When Aspect is set to 16:9 Zoom (see page 73), the OSD is not
displayed even if On Screen is set to On.
Dimmer (Dimmer)
Use to adjust the brightness of the front panel display.
Choices: –4 to 0
■ Multi Zone (Multi zone)
Use this feature to customize the Zone 2 and Zone B
settings.
Manual Setup > Option > Multi Zone >
Speaker B (Speaker B)
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: Zone1, ZoneB
• Select Zone1 to turn on/off SPEAKERS A and B when
the speakers connected to the SPEAKERS B terminals
are set in the main room.
• Select ZoneB if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned off and SPEAKERS B is
turned on, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
• If you connect headphones to the PHONES jack on this unit, the
sound is output from both the headphones and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual CINEMA DSP mode.
Note
Note
Notes
00EN.00_DSPZ9_GB.book Page 77 Thursday, November 13, 2003 10:55 AM