Filter
Top Products
68
SYSTEM OPTIONS
Surround (Surround left/right speakers)
Choices: Large, Small, None
• Select Large if you have large surround left and right
speakers or if a rear subwoofer is connected to the
surround speakers. The entire range of the surround
channel signal is directed to the surround left and right
speakers.
• Select Small if you have small surround left and right
speakers. The low-frequency signals of the surround
channel are directed to the speakers selected with
“Bass Out”.
• Select None if you do not have surround speakers. This
sets the unit to the Virtual CINEMA DSP mode (see
page 42) and automatically sets the surround back
speaker setting (Surround Back) to None.
Surround Back
(Surround back left/right speakers)
Choices: Large x1, Small x1, Small x2,
Large x2, None
• Select Large x1 if you have a large surround back
speaker. The unit directs the entire range of the
surround back channel signal to the surround back left
speaker.
• Select Small x1 if you have a small surround back
speaker. The low-frequency signals of the surround
back channel are directed to the speakers selected with
“Bass Out”, and the rest of the frequency signals are
directed to the surround back left speaker.
• Select Small x2 if you have two small surround back
speakers. The low-frequency signals of the surround
back channels are directed to the speakers selected with
“Bass Out”.
• Select Large x2 if you have two large surround back
speakers. The unit directs the entire range of the
surround back channel signal to the surround back
speakers.
• Select None if you do not have a surround back
speaker. The unit directs all of the surround back
channel signal to the surround left and right speakers.
If you select Large x1 or Small x1, connect a speaker to the
SURROUND BACK (SINGLE) speaker terminals.
Note
00EN.00_DSPZ9_GB.book Page 68 Thursday, November 13, 2003 10:55 AM