Yamaha DSP-Z9 Stereo Amplifier User Manual


 
62
SYSTEM OPTIONS
EQ Select (Equalizer select)
Choices: Auto Setup PEQ, Manual GEQ, EQ Defeat
Select Auto Setup PEQ to use the equalizer adjusted in
auto setup.
Select Manual GEQ to adjust the built-in 9-band
graphic equalizer so that the tonal quality of the
presence L/R, center, surround L/R and surround back
L/R speakers matches that of the front left and right
speakers.
Select EQ Defeat to cancel equalizing.
Choices: –6 to +6 (dB)
You can adjust 9 frequency bands: 63Hz, 125Hz, 250Hz,
500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 16kHz
Front L adjusts the tonal quality of the front left
speaker.
Front R adjusts the tonal quality of the front right
speaker.
Center adjusts the tonal quality of the center speaker.
Surround L adjusts the tonal quality of the surround
left speaker.
Surround R adjusts the tonal quality of the surround
right speaker.
Surround Back L adjusts the tonal quality of the
surround back left speaker.
Surround Back R adjusts the tonal quality of the
surround back right speaker.
Presence L adjusts the tonal quality of the presence
left speaker.
Presence R adjusts the tonal quality of the presence
right speaker.
Cinema EQ and Graphic EQ adjustments do not affect the output
to your headphones.
Tone Control (Tone control)
Use to adjust the amount of bass and treble output to your
speakers and headphones.
Manual Setup > Sound > Tone Control >
Control (Tone control)
Choices: Defeat, Speaker, Headphone
Select Defeat if you do not want to make any
adjustments.
Select Speaker to adjust the bass/treble balance of your
speakers.
Select Headphone to adjust the bass/treble balance of
your headphones.
Bass (Bass control)
Use this feature to adjust low-frequencies output to your
speakers or headphones.
Choices: –6 to +6 (dB), Initial: 0 dB
You can adjust three frequency bands: 125Hz, 350Hz,
500Hz.
Note
00EN.00_DSPZ9_GB.book Page 62 Thursday, November 13, 2003 10:55 AM