Filter
Top Products
103
English
SOUND FIELD OPTIONS
ADDITIONAL
INFORMATION
You can adjust the values of certain digital sound field
parameters so that the sound fields are recreated
accurately in your listening room. The following
parameters are not always found in every program.
1 Press TOP on the GUI remote.
2 Select Stereo/Surround, then press h.
3 Select the desired sound field program, then
press h to access and adjust.
■ DSP Level (DSP level)
This parameter adjusts the level of all DSP effect sounds
within a narrow range. Depending on the acoustics of your
listening room, you may want to increase or decrease the
DSP effect level relative to the level of direct sound.
Control range: –6 dB – +3 dB
■ Init. Delay (Initial delay)
This parameter changes the apparent distance from the
source sound by adjusting the delay between the direct
sound and the first reflection heard by the listener. The
smaller the value, the closer the sound source seems to the
listener. The larger the value, the farther it seems. For a
small room, set to a small value. For a large room, set to a
large value.
Control range: 1
– 99 msec
■ Room Size (Room size)
This parameter adjusts the apparent size of the sound field.
The larger the value, the larger the sound field becomes.
As sound is repeatedly reflected around a room, the larger
that room is, the longer the time between the original
reflected sound and the subsequent reflections. By
controlling the time between the reflected sounds, you can
change the apparent size of the virtual venue. Changing
this parameter from one to two doubles the apparent
length of the room.
Control range: 0.1 – 2.0
Stereo/Surround menu
Source sound
Early
reflections
Level
Level
INIT. DLY
INIT. DLY
Time
Time
Sound source
Reflection face
Small value = 1 ms
Large value = 99 ms
Source sound
Level
Time
Level
Time
Early
reflections
Sound source
Large value = 2.0
Small value = 0.1
00EN.00_DSPZ9_GB.book Page 103 Thursday, November 13, 2003 10:55 AM