Filter
Top Products
ISM4 INSTALLATION & PROGRAMMING MANUAL
26
{0/1} = Either 0 (zero) or 1 (one); 0 = OFF, 1 =ON
CLONING THE ISM4
When necessary, the Macro Table (All Source ON and OFF Macros and their contents) can be cloned from a
programmed ISM4 to another ISM4. The cloning process requires a Xantech Null Stereo 3.5mm Mini Cable,
(Xantech Part No 06028145). DO NOT USE A STANDARD STEREO MINI CABLE FOR CLONING. To clone an
ISM4:
1. Using a Xantech Null Stereo 3.5mm Mini Cable, (Xantech Part No 06028145), connect the RS232 Port on
the programmed ISM4 to the RS232 Port on the unprogrammed ISM4.
2. In Normal Operating Mode, press the Prev Button on the Primary (programmed) ISM4 unit for longer than 2
seconds. The Source LED’s will flash fast for a few seconds and stop. Cloning is complete.
3. Install and use as programmed.