Filter
Top Products
ISM4 INSTALLATION & PROGRAMMING MANUAL
23
with the RC68 Toggle Command. The System Reference Device (Source 1) and Sources 2-4 should all
turn ON.
Test OFF
6. With all sources turned ON, test the system by pointing the System Remote toward the ISM4 or connected
IR Receiver and press the button with the RC68 Toggle Command. The System Reference Device
(Source 1) and Sources 2-4 should all turn OFF.
7. If any functions were ‘missed’, test the individual ON or OFF Macro for that Source. Re-learn IR Commands
and adjust delays as necessary until the system powers up correctly.