VocoPro DTX-9909K Stereo Receiver User Manual


 
42
RVB TIME (Microphone DSP reverb time)
Use this setting to set the reverb time for the DSP micro-
phone reverb effect.
NOTE: The DSP effect volume must be set loud enough in
order to hear the effect
Use t
he Input/Adjust knob on the front panel or the
and
buttons on the remote control to
adjust
the
reverb time
.
Reverb Time Range:
0
--
0 -- 0
80
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the
button on the remote control to
increase the reverb time.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the
button on the remote control
decrease the reverb time.
RVB VOLUME (Microphone DSP reverb volume)
This setting determines how much DSP reverb is present in
the microphone signal.
Use t
he Input/Adjust knob on the front panel or the
and
buttons on the remote control to
adjust the volume for
the
DSP reverb effect
.
Reverb Volume Range: 0 -- 80
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the
button on the remote control to
raise the reverb volume.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the
button on the remote control to
lower the reverb volume.
FB TIME (Reverb feedback time)
Use this setting to set the reverb feedback time for the DSP
microphone reverb effect.
NOTE: The DSP effect volume must be set loud enough in
order to hear the effect
Use t
he Input/Adjust knob on the front panel or the
and
buttons on the remote control to
adjust
the
reverb feed-
back time
.
Feedback Time Range:
0ms
--
0ms -- 0ms
80ms
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the
button on the remote control to
increase the reverb feedback time.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the
button on the remote control
decrease the reverb feedback time.
OK (Karaoke output mode)
Use this setting to select which speakers will be used for
microphone output.
Use t
he Input/Adjust knob on the front panel or the
and
buttons on the remote control to
cycle through the av
ail-
able
output modes
.
Choices: L R, C, L R C, SL SR L R C, and SL SR C
L R
- Microphone output will be in the Front Left and Front
Right speakers
C
- Microphone output will be in the Center speaker
L R C
- Microphone output will be in the Front Left, Front
Right, and Center speakers
SL SR L R C
- Microphone output will be in the Surround
Left, Surround Right, Front Left, Front Right, and Center
speakers
SL SR C
- Microphone output will be in the Surround Left,
Surround Right, and Center speakers
FB EX (Feedback reducer)
Use this select which Feedback Reducer setting to use
Use t
he Input/Adjust knob on the front panel or the
and
buttons on the remote control to
c
ycle through the
avail-
able Feedback Reducer settings: 1, 2, 3, and O
FF
Karaoke Mode cont.