Filter
Top Products
14
Connecting to the
REC OUT jacks
The L/R (red and white) RCA Record Output
jacks on t
he
rear panel can be connected to any self-powered input device
with RCA
in
put
s.
(i.e. recording device, powered speakers
,
etc)
What you will need:
•
P
owered de
vice with L/R RCA inputs
•
RCA L
/R audio cable (red & white)
1. Connect one end of the red and white RCA cable to the
REC OUT jacks on the DTX-9909K’s rear panel
2. Connect the other end of the red and white RCA cable to
the RCA inputs on the recording device, powered speak-
ers, etc.
Connecting to the
ZONE2 PRE jacks
The ZONE 2 channel allows you to output any of the analog
input channels to a different location to be played simultane-
ously with the main zone. This is common for home enter-
tainment setups that have different things playing in different
rooms at the same time.
NOTE: Zone 2 does not include any of the digital
input channels: optical, coaxial, 7.1 surround
sound.
The L/R (red and white) RCA
ZONE2 PRE ou
tput
jacks on
t
he rear panel can be connected to any self-powered input
device
with RCA
in
put
s.
(i.e. recording device, powered
speakers
, etc)
What you will need:
•
P
owered de
vice with L/R RCA inputs
•
RCA L
/R audio cable (red & white)
1. Connect one end of the red and white RCA cable to the
ZONE2 PRE output jacks on the DTX-9909K’s rear panel
2. Connect the other end of the red and white RCA cable to
the RCA inputs on the recording device, powered speak-
ers, etc.
3. Press the ZONE2 button on the front panel to enter
Zone2 to make changes. The number 2 will appear in the
display indicating that Zone2 is open.
2
Getting Connected cont.