Filter
Top Products
31
11.
F.
B-EX (feedback eliminator) button
- In Karaoke
Mode*, use this button to cycle through the 3 levels of
DSP feedback eliminator or to turn it off.
12.
Zone 2 Menu button
- Accesses the music Bass and
Treble menus for Zone 2. Press the Zone 2 Menu button
to choose either Bass2 or Treble2 and use the
button
on the remote to decrease the Bass or Treble and the
to increase it.
13. Arrow buttons
- Use the arrow buttons to adjust the
various speaker settings. Use the
and
arrows to
select which settings to adjust. Use the
and
buttons
to change the parameters for each settings. To open the
Speaker Settings menu press either of the
and
ar-
rows or press the MENU button.
14.
Menu button
- Accesses the Speaker Settings Menu.
Use the arrow buttons to make changes in the Speaker
Settings Menu. All of the information will appear on the
display screen on the front panel.
15.
Test button
- Press this button to perform a channel
test. The channel test sends sound to each of the speak-
er outputs to test whether they are connected correctly.
The display screen will show which speaker is being tested
at a given time so that you can make sure the connec-
tions are correct.
16.
Zone2 Button
- Toggles between input channel Zone 1
and input channel Zone 2.
Zone 1: Analog and digital input channels (DVD, AUX1,
AUX2, AUX3, TV, AM/FM Tuner, 7.1 CH, OPT1, OPT2,
COAX1, COAX2, COAX3, TAPE and CD)
Zone 2: Analog input channels (DVD, AUX1, AUX2,
AUX3, TV, AM/FM Tuner, TAPE and CD)
17.
Tape/COX1 input button
- Toggles between the TAPE
and COAX1 input channels. When the DTX-9909K is
set to Zone 2, this button will only access the TAPE input
channel as the digital coaxial channels are not available on
Zone 2.
18.
7.1
input channel button
- Selects the 7.1 surround
sound input channel. When the DTX-9909K is set to
Zone 2, the 7.1 surround sound input channel will not be
available.
1
9.
TV
input channel button
- Selects the TV input channel.
20.
CD/COX2 input channel button
- Toggles between the
CD and COAX2 input channels. When the DTX-9909K
is set to Zone 2, this button will only access the CD input
channel as the digital coaxial channels are not available on
Zone 2.
21.
AUX3 input channel button
- Selects the AUX3 input
channel.
22.
DVD/OPT1 input channel button
- Toggles between the
DVD and OPT1 input channels. When the DTX-9909K is
set to Zone 2, this button will only access the DVD input
channel as the digital optical channels are not available on
Zone 2.
23.
AUX2/COX3 input channel button
- Toggles between
the AUX2 and COAX3 input channels. When the DTX-
9909K is set to Zone 2, this button will only access the
TAPE input channel as the digital coaxial channels are not
available on Zone 2.
24.
TUNER AUTO
- Selects the AM/FM tuner channel and
toggles between AM and FM. Hold this button down for
1 second to begin Auto Tuning. The stations for each
band (AM and FM) must be tuned before using.
25.
AUX1/OPT2 input channel button
- Toggles between
the AUX1 and OPT1 input channels. When the DTX-
9909K is set to Zone 2, this button will only access the
AUX1 input channel as the digital optical channels are not
available on Zone 2.
Descriptions and Functions
R
emote Control