Filter
Top Products
21
Connect
ing a Player with Digital Coaxial Audio Out-
puts
T
here are 3 Digital Coax
ial audio
inputs
on the
DT
X-9909K
DTX-9909K DT
rear panel
: COAX1, COAX2 and COAX3.
What you will need
• Player with a Digital Coaxial output
• Digital Coaxial cable
1. Connect one end of the Coaxial cable to the Coaxial audio
output on the player
2. Connect the other end of the Coaxial cable to either of the
Coaxial inputs on the DTX-9909K rear panel
3. Select the proper input channel on the DTX-9909K.
Select the DVD input channel for COAX1, the AUX1
input channel for COAX2 and the AUX2 input channel for
COAX3
NOTE: Make sure the player’s video is also con-
nected to the correct input channel
Matching up the Correct Video Input
COAX1/DVD
: When connecting a player’s audio to the
COAX1 input, make sure that player’s video is connected
to one of the video inputs on the DVD input channel.
COAX2
/
AUX1
/AUX1/
: When connecting a player’s audio to the
COAX2 input, make sure that player’s video is connected
to one of the video inputs on the AUX1 input channel.
COAX3
/AUX2
: When connecting a player’s audio to the
COAX3 input, make sure that player’s video is connected
to one of the video inputs on the AUX2 input channel.
Se
lectin
g the
c
orrect input channel:
Front panel
: Press the INPUT button on the DTX-9909K
front panel until the correct input channel is displayed on
the screen
Remote Control
: Press the corresponding input button on
the remote control to access the correct input channel.
i.e. TAPE/COX1 button for the COAX1 input channel, the
CD/COX2 button for the COAX2 input channel and the
AUX2/COX3 button for the COAX3 input.
Getting Connected cont.