Filter
Top Products
41
•
MIC1 VOL (Microphone channel 1 volume)
Use this setting to set the maximum volume level for micro-
phone channel 1. NOTE: If this is set too low, the micro-
phone will not be loud enough.
Use t
he Input/Adjust knob on the front panel or the
and
buttons on the remote control
to
adjust the
maximum
volume for microphone
channel
1
.
Volume Range: 0 -- 80
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the
button on the remote control to
raise the volume.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the
button on the remote control to
lower the volume.
•
MIC2 VOL (Microphone channel 2 volume)
Use this setting to set the maximum volume level for micro-
phone channel 2. NOTE: If this is set too low, the micro-
phone will not be loud enough.
Use t
he Input/Adjust knob on the front panel or the
and
buttons on the remote control to
adjust the
maximum
volume for microphone
channel 2
.
Volume Range: 0 -- 80
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the
button on the remote control to
raise the volume.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the
button on the remote control to
lower the volume.
•
MIC BASS (Microphone bass tone level)
Use this setting to adjust the amount of bass tone that is
present in the microphone channels 1 and 2.
Use t
he Input/Adjust knob on the front panel or the
and
buttons on the remote control to
adjust the
microphone
bass tone level
.
Bass Tone Range: -10dB -- +10
dB
Bass Tone Range: -10dB -- +10dBBass Tone Range: -10dB -- +10
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the
button on the remote control to
increase the bass.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the
button on the remote control
decrease the bass.
•
MIC TREB (Microphone Treble tone level)
Use this setting to adjust the amount of treble that is pres-
ent in the microphone channels 1 and 2.
Use t
he Input/Adjust knob on the front panel or the
and
buttons on the remote control to
adjust
the microphone
treble level
.
Treble Tone Range: -10dB -- +10
dB
Treble Tone Range: -10dB -- +10dBTreble Tone Range: -10dB -- +10
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the
button on the remote control to
increase the treble.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the
button on the remote control
decrease the treble.
•
MIC DELAY (Microphone Echo/Delay Effect)
Use this setting to set the delay time for the DSP micro-
phone echo effect.
NOTE: The DSP effect volume must be set loud enough in
order to hear the effect
Use t
he Input/Adjust knob on the front panel or the
and
buttons on the remote control to
adjust
the
delay time
.
Delay Time Range:
0ms -- 250ms
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the
button on the remote control to
increase the delay time.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the
button on the remote control
decrease the delay time.
•
REPEAT (
Mi
crophone
E
cho/Repeat Effect)
Use this setting to set the amount of repeat for the DSP
microphone echo effect.
NOTE: The DSP effect volume must be set loud enough in
order to hear the effect
Use t
he Input/Adjust knob on the front panel or the
and
buttons on the remote control to
adjust
repeat
level
.
Repeat Range:
0dB
--
0dB -- 0dB
8
0dB
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the
button on the remote control to
increase the repeat level.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the
button on the remote control
decrease the repeat level.
Karaoke Mode cont.