Filter
Top Products
92
Search and Close Call Options
This setting controls the modulation type used for quick
search and Close Call operations. Select your setting, then
press E.
Auto Uses the default setting for the current frequency
(see the table at the front of the manual)
AM Uses AM (amplitude modulation)
FM Uses FM (frequency modulation)
NFM Uses narrowband FM
Setting Attenuation
Srch/CloCall Opt E
Set Attenuation E
This setting controls the attenuator for quick search and
Close Call operation. Select your setting, then press E.
Off The attenuator is off.
On Reception is attenuated by about 18 dB.
Note: Turn on this setting if you are near other strong
signal sources. Attenuation sometimes helps to reduce
interference and desensitization that strong signals create.
Setting Data Skip
Srch/CloCall Opt E
Set Data Skip E
This setting controls how the scanner behaves when it
detects a constant-level transmission during quick search
or Close Call operation. Select your setting, then press E.
Off The scanner remains on the transmission until it ends.
On The scanner quickly resumes searching or Close Call
operation.
Notes:
• If you are trying to test the Close Call feature with a
nearby transmitter and you do not talk into the
transmitter, the scanner will detect this as data and
Menu
Menu