Filter
Top Products
66
Programming/Editing Optional Settings
Off - the scanner remains on the channel until the
transmission stops. Press E to select.
Notes:
• This setting is ignored for AM channels.
• The default setting for this feature is On.
Editing the Fleet Map
(Motorola Systems Only)
program system E
Select the system E
Edit Sys Option E
Edit Fleet Map E
For Motorola Type I systems, you must enter a system
fleet map in order for the scanner to properly track and
display talk group ID's. The fleet map is usually included
in the same resource that provided system frequencies
and talk group ID lists.
Rotate the scroll control to select the fleet map:
Preset - select from the 16 most common fleet maps (see
“Preset Fleet Maps” on Page 103). Press E to select.
Custom - allows you to enter a custom fleet map. Enter the
size code for each block. Press E to select.
Notes:
• If you don't know the fleet map for your Motorola Type
I system, check the Internet. This information is
commonly posted on sites such as those we
reference in “Where To Get More Information” on
Page 27.
• The default setting of no fleet map is the correct
setting for Motorola Type II systems.
Menu