Uniden BC246T Radio User Manual


 
74
Programming/Editing Optional Settings
Setting Channel Priority
(Conventional Channels Only)
program system E
Select the system E
Edit Group E
Select the group E
Edit Channel E
Select the channel E
Set Priority E
This setting controls whether the scanner treats the
channel as a priority channel while scanning. Select your
setting, then press E.
On - when you turn on the Priority feature, the channel will
be scanned every 2 seconds. P appears at the end of the
default name.
Off - the channel will not be treated with priority.
Note: The default setting is Off.
Setting Channel Alert
program system E
Select the system E
Edit Group E
Select the group E
Edit Channel E
Select the channel E
Set Alert E
This setting controls whether the scanner will alert you
when the channel becomes active. Select your setting,
then press E.
On - the scanner beeps when the channel becomes active.
Off - no alert sounds.
Menu
Menu