Filter
Top Products
67
Programming/Editing Optional Settings
Setting the Motorola Status Bit
(Motorola Systems Only)
program system E
Select the system E
Edit Sys Option E
Set Status Bit E
Motorola systems use talk group ID's in multiples of 16.
ID numbers that fall between these ID's indicate special
status flags for the system. This setting determines how
the scanner will handle ID's that are not multiples of 16.
Select your setting then press E.
Ignore - the scanner rounds all received ID's down to the
next interval of 16.
Yes - the scanner treats all received ID's as unique ID's.
Note: The default setting is Ignore.
Setting the End Code Operation
(Motorola Systems Only)
program system E
Select the system E
Edit Sys Option E
Set End Code E
This setting determines how the scanner handles the
transmission end code sent by most Motorola systems.
Select your setting then press E.
Yes - the scanner immediately returns to the control
channel when it detects the end code.
Ignore - the scanner does not return to the control channel
until the carrier drops.
Note: The default setting is Yes.
Menu
Menu