Uniden BC246T Radio User Manual


 
70
Programming/Editing Optional Settings
Setting System Attenuation
(Trunked Systems Only)
program system E
Select the system E
Set ATTENUATIONE
This setting controls whether the attenuator will be on or
off for the current system. Select your setting then press E.
Off - the attenuator is off.
On - system frequencies are attenuated by about 18 dB.
Notes:
Turn on this setting if you are near strong signal
sources. Attenuation can help reduce interference
and desensitization that strong signals create.
You can also turn this setting on or off by holding on a
trunked system, then pressing
+ E.
Deleting Systems
program system E
Select the system E
Delete SystemE
The scanner prompts you to confirm deletion. To confirm,
press E. To cancel, press No.
Notes:
Deleted systems cannot be restored. You must
re-enter them.
You cannot restore preloaded systems.
Copying Systems
To copy a system including all settings, groups, and
channels:
Menu
Func
Menu