56
Programming Radio Systems
Next, refer to the appropriate section to set group-wide
options:
•See “Entering/Editing the Group Name” on Page 71
•See “Setting the Group Quick Key” on Page 71
•See “Deleting Groups” on Page 72
•See “Copying Systems” on Page 70
•See “Entering/Editing Motorola Channels” on
Page 56
•See “Setting I-Call (Motorola and EDACS Systems
Only)” on Page 68
Entering/Editing Motorola Channels
Edit Channel E
New Channel E Input TGID
Enter the Talk Group ID for the channel, then press E.
Notes:
• Motorola Type 2 Talk Group ID's are entered as
5-digit numbers.
• Motorola Type I Talk Group ID's are entered as two
numbers separated by a hyphen. Use the decimal
point to enter the hyphen.
• To enter an I-Call ID, press , then enter the ID.
The appears as an i when entering the ID, but it
appears as a seven ( 7) when it is active on a Type 2
system.
Then, refer to the appropriate section to change a
channel setting:
•See “Setting Emergency Alert (Motorola and EDACS
Systems Only)” on Page 68
•See “Editing the Channel Name” on Page 73
•See “Setting Channel Alert” on Page 74
•See “Setting Channel Lockout” on Page 77
•See “Deleting Channels” on Page 78
•See “Copying/Pasting Channels” on Page 78