65
Programming/Editing Optional Settings
ID Scan - the scanner only stops on channels you have
programmed into the system.
ID Search - the scanner stops on any transmission for
unlocked talk group ID's.
Note: You can also change this setting by pressing Scan
while scanning the system.
Setting the Base Frequency/Step/Offset
(Motorola UHF/VHF Systems Only)
program system E
Select the system E
Edit Sys Option E
Edit Band Plan E
Select Plan Select a band plan (1, 2, or 3) E
Input Base Freq Input the base frequency E
Select Step (5 kHz, 12.5 kHz, 25.0 kHz, 37.5 kHz, 50.0
kHz, 62,5 kHz, 75.0 kHz, 87.5 Khz, or 100.0 kHz)
E
Offset (380-759) Input the offset E
This setting lets you enter the base frequency, step, and
offset for the band plan you select. This information lets
you set the scanner so it will scan a Motorola UHF/VHF system.
Setting Data Skip
(Conventional Systems Only)
program system E
Select the system E
Edit Sys Option E
Set DATA SKIP E
This setting controls how the scanner behaves when it
stops on a channel that has a data signal.
On - the scanner stops briefly on the channel, but then
immediately resumes scanning automatically. Press E to
select.
Menu
Menu