Filter
Top Products
It is also possible to change to Setup mode when you are in Rolling test
mode if you want to change the configuration for the test printout.
To do this, press the key Setup. The printer then changes to Setup
mode and the first of the 14 main levels is then displayed.
Program your printer in the usual way for the test printout to change the
parameters. See section
Programming via the control panel
.
Some changes in menu mode may cause the printer to reinitialize; in this
case the Rolling ASCII test is aborted.
By pressing the key Setup you exit Setup mode and the printer
once again returns to Rolling ASCII test mode test mode.
Testmode Off is displayed. Press the key Online, the test printout starts.
The self-test can be interrupted by pressing the key Online which will
stop printing and put the printer into Offline status.
Before you begin printing, you can adjust the paper for the printout with
soft keys ↑ and ↓.
Adjust Paperway
Menu Char
Online
Setup
21
3
4
Testmode Off
Online
Setup
Park LF/FF
21
3
4
BACK
QUIT
?
PRINT
Reference manual Test functions
72