Tally Genicom 2150 Speaker User Manual


 
BACK
QUIT
?
PRINT
Reference manual Troubleshooting
102
Prints undefined characters
1. Check that the interface plug is correctly connected to the computer and
to the printer.
2. Check that the proper emulation and the correct character set (country,
CG table or character set) is selected in the Setup menu.
3. Check the length of the interface cable; see
Specifications
.
4. Set CX-bid in the test menu to OFF; see
Bidirectional parallel interface
.
The first line is not completely
printed out at the top
Check the function FormAdj. Refer to the chapter
The menu.
Dots within characters are
missing
1. Check whether the ribbon is damaged, if necessary replace it; see the
section
Changing the ribbon cassette
.
2. Set the correct printhead gap.
3. Check whether the platen is damaged.
4. Check whether the printhead is damaged.
We recommend to use genuine ribbon cassettes only.
In case of points 3 or 4, please contact your dealer.