Filter
Top Products
➤ Checking the printer
voltage
Make sure that the device has been set to the correct voltage (e.g. 230 V
in Europe, 120 V in the USA). To do this, check the type plate above the
power inlet at the back of the printer. Contact your dealer if the setting is
incorrect.
Never switch on the printer if the voltage setting is incorrect, since
this may result in severe damage.
You can set the printer to the correct mains voltage
yourself. To do this, cautiously tilt the printer to the
rear.
STOP
pull to open
pull to open
BACK
QUIT
?
PRINT
Reference manual Installation
7
Make sure that the fixing clips of the par-
allel connection are not bent
STOP
STOP