Filter
Top Products
Parameter group Parameter
Description
AutoTear View/Tear = Off*
View = 1s
View = 3s
View = 6s
Tear = 1s
Tear = 3s
Tear = 6s
Tear at TOF
The View function or the Tear function can be selected as desired.
When View is switched on, the last printed text is visible. As soon as data is
received the paper moves to the “normal” print position. After printing the
printer waits for the given interval to bring the paper once more to the auto
view position.
The paper is in the tear off position when Tear is switched on, the perforation
of the paper is positioned at the tear off edge of the printer. If data is received,
the paper returns to the normal print position. After printing, the printer waits
for the given interval to bring the paper once more to the tear off position.
If the tear off edge does is not aligned with the perforation of the paper then
this can be corrected (see
Mechanical adjustments to the printer
).
If the parameter View/Tear = Off is set, the paper can still be brought into a
View or Tear position via a specific sequence (see
Emulations
, MTPL
sequences).
If the parameter Tear at TOF is set, the paper perforation is automatically
positioned at the tear off edge as long as the current print position TOF is
activated. Feeding takes place after approx. 1.5 seconds (hold time). If any
data is received during this period of time the paper is not positioned at the
tear off edge.
With this function it must be noted that the printer may only be switched off
when the print position is at TOF.
Width Width = 8 Inch
Width = 13.2 Inch
Width = 13.6 Inch*
Selects the line length in inches.
With the setting of 8 Inch, the printer operates like a printer with a width of
only 8 inches.
BACK
QUIT
?
PRINT
Reference manual The Menu
64