Tally Genicom 2150 Speaker User Manual


 
Parameter group Parameter
Description
Barcode On/Off* With this function selected it is posible to print different barcodes and LCP
(Large Character Printing). The definition and activation is performed by
special sequences through the interface. Since this selection is possible for all
emulations it must be noted that con-flicts in sequence conformity with the
selected emulation may occur. For this reason the barcode function can also
be switched on and off by MTPL sequences. (The possible barcodes,
LCP characters and the operation of these functions are described in the
Barcode Programmer’s Application Manual
.)
Barmode Secured
Unsecured*
In secured mode, the space which the barcode characters require is “protec-
ted”. In each line, other barcode or normal characters can also be printed.
These additional characters are printed in the line currently being printed and
and in the subsequent lines, without affecting the barcode which is already
being printed. Consequently, normal characters can be printed in every line to
the right or left of the barcode.
In unsecured mode, the required paper transport for printing barcodes and
LCP is carried out automatically, it is not possible to print more than one line
of normal characters in the barcode line.
All characters in the mixed line are printed such that their bottom edges are in
a straight line. This function may be switched on and off by sequences.
FFmode On/Off* FF mode is set to On: If the paper is positioned in the first printing line, form
feeds will be ignored.
FF Mode is set to Off: Form feed will be performed in all cases.
BACK
QUIT
?
PRINT
Reference manual The Menu
65