Filter
Top Products
48
Recorders
(audio devices with record and playback facilities)
Analogue recorders
The components of your system should be connected as
shown in Wiring Diagram 6. This is the procedure:
• Connect the
INPUT
sockets of the recorder to the
OUT
sockets (e. g.
VCR 1
) of the
DD 1535 R
, and the
OUTPUT
sockets of the recorder to the
IN
sockets
(e. g.
VCR 1
) of the
DD 1535 R
. Take care to maintain
the correct channel assignment (
L
to
L, R
to
R
).
Note:
It is only possible to record from sources whose analogue
sound outputs are connected to the
DD 1535 R
. If you are
using a device with a digital sound output, please be sure
to connect the analogue sound output to the input sockets
of the
DD 1535 R
at the same time.
*1 If you also wish to use VCR 2 as a Hi-Fi audio
recorder, please connect its sound outputs to the
TAPE 2 outputs of the stereo amplifier, using a Y-
lead if necessary.
*
Sound cable between DVD player and stereo amplifier only necessary if the DVD is also to be used for pure two-
channel stereo reproduction via the stereo amplifier, or if you wish to use an audio recorder (TAPE) to make sound
recordings from the DVD player.