Filter
Top Products
28
Special Functions menu
In the Special Functions menu you can set the following
points:
TRIGGER 2 / TRIGGER 3
The back panel of the
DD 1535 R
features control
outputs for automation functions. For example, you can
use them to control a motorised screen, so that it
extends automatically when you select a video source;
alter-natively the light could be dimmed automatically
when you select video operations.
In this menu you can determine which conditions cause
Trigger signals 2 and 3 to be generated.
Trigger signal 1 is switched automatically when the
device is switched on, and cannot be configured.
If you have queries regarding the automation facilities
and how they can be implemented, please ask your local
specialist dealer or an experienced electrician.
Audio delay for all sources:
The basic sound delay setting (LipSync) is crucially
dependent upon the picture delay time of the display
device - but it may also vary from one source device to
the next. For this reason the
DD 1535 R
can be set to a
different sound delay for each source.
To make it easier to set these values, this menu point
can be used to set the delay time of the display device
as the basic value for all sources. This value can then be
altered individually in the Main Menu.
The operating instructions for your display device may
state suitable values. If not, the following can be taken as a
sensible starting point:
Display device Sound delay
50 Hz television 0 ms
100 Hz television xx ms
Progressive Scan Display min. yy ms