Filter
Top Products
34
Approved usage
This device is designed exclusively for reproducing
sound and/or pictures in the domestic environment. It is
to be used in a dry indoor room which meets all the
recommendations stated in these instructions.
Where the equipment is to be used for other purposes,
especially in the medical field or any field in which safety
is an issue, it is essential to establish the unit’s suitability
for this purpose with the manufacturer, and to obtain
prior written approval for this usage.
equipment which includes a radio or television
receiving section must be operated within the stipulations
laid down by the Post Office and the
Telecommunications authorities in the country in which it
is used. This unit may only be used to receive or
reproduce those transmissions which are intended for
public consumption. The reception or reproduction of
other transmissions (e. g. police radio or mobile radio
broadcasts) is prohibited.
The only permissible method of disposing of
this product is to take it to your local
collection centre for electrical waste.
Care of the surround receiver
Always disconnect the unit from the mains supply before
cleaning it.
The surfaces of the case should be wiped clean with a
soft, dry cloth only.
Never use abrasive or solvent-based cleaners!
Before switching the unit on again check carefully that no
short-circuits exist at the terminals, and that you have not
disturbed any connections.
Device approval and conformity with EC
directives
In its original condition the unit meets all currently valid
German and European regulations. It is approved for use
as stipulated within the EC.
By attaching the symbol to the surround receiver,
declares its conformity with the EC directives
89/336/EEC
, amended by
91/263/EEC
and
93/68/EEC
,
and
73/23/EEC
, amended by
93/68/EEC
and the national
laws based on those directives.
The original, unaltered factory serial number must be
present on the outside of the unit, and must be clearly
legible. The serial number is a constituent part of our
conformity declaration and therefore of the approval for
operation of the device.
The serial numbers on the decoder and in the original
documentation supplied with it (in particular the
inspection and guarantee certificates), must not be
removed or modified, and must match exactly.
Infringing any of these conditions invalidates
conformity and approval, and the unit may not then be
operated within the EC. Improper use of the equipment
makes the user liable to penalty under current EC and
national laws.
Any modifications or repairs to the unit, or any other
intervention by a workshop or other third party not
authorised by , invalidates the approval and
operational permit for the equipment.
Only genuine accessories may be connected to the
decoder, or such auxiliary equipment which is itself
approved, and fulfils all currently valid legal
requirements.
When used in conjunction with auxiliary devices or as
part of a system, this unit may only be used for the
purposes stated in the section entitled ‘Approved
usage’.
FCC Information
to the user
(for use in the United States of America only)
Class B digital device – instructions:
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and
receiver.
-
Connect the equipment into an outlet on a circuit
different form that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV
technician for help.