Filter
Top Products
30
Connections
DIGITAL INPUT
(
OPTICAL
)
Two inputs for digital source devices with optical digital
outputs can be assigned to the AV inputs (VCR, SET-
TOP BOX, DVD, TV AUX AV, CAM) or to the Audio
inputs (CD, TAPE, AUX/P) (see
'
Inputs Menu
'
).
DIGITAL INPUT
(CINCH)
The three inputs for digital source devices with co-axial
digital outputs can be assigned to the AV inputs or to the
Audio inputs (see
'
Inputs Menu
'
).
Multichannel (MCH) INPUT
Input for a surround source with integral decoder. It can
be assigned to any AV input or to the Audio inputs (see
'
Inputs Menu
'
).
PRE OUT AS-LINK
Sockets for active loudspeakers with
AS-L
INK
input.
The signal for the rear channels is present at this output.
PRE OUT CENTER
Output for connecting a active center loudspeaker or an
external power amplifier for the center channel.
PRE OUT SC-LINK
Output for connecting a active sub-woofer with
SC-LINK input.
PRE OUT SUBWOOFER
2 sockets for active sub-woofers (CINCH)
TASI
Interface for connecting the decoder to a
'R'
-series
pre-amplifier, integrated amplifier or receiver. The
interface automatically switches to surround mode. In
this mode the volume and tone controls of the stereo
pre-amplifier are disabled, as these functions are now
assumed by the decoder.
SUBWOOFER INPUT
(CINCH)
The stereo pre-amplifier output can be connected to this
socket in order to pass its output signal through to the
subwoofer in stereo mode.
TRIGGER output
Control signals are present at these sockets for auto-
mation functions (remote switching of projector, light
control, motorised screen etc.) (see
'
Special Functions
menu
'
).
The output level of the Trigger signals is 12 V. Each
output can handle a maximum load of 5 mA.