75
GB
E:\STR-DA7100ES\2320745143\2320745143STRDA7100ESUC\01GB-
STRDA7100ESUC\050AMP.fm
masterpage: Right
STR-DA7100ES
2-320-745-14 (3)
Amplifier Operation
Notes
• Sound adjustments do not affect the signal output
from the TAPE OUT or MD/DAT OUT jacks.
• The audio signals input to the MULTI CHANNEL
INPUT jacks are output only from the L/R sound of
FRONT.
To record digital sound
Connect a component for playback to the
digital audio input (OPTICAL IN) jack, and
connect the recording component to the
OPTICAL MD/DAT jack.
You can record from a video component using
the receiver. See the operating instructions
supplied with your recording component.
1 Press INPUT SELECTOR, then
select the playback component
by moving and pressing the
easy scroll key.
You can also use INPUT SELECTOR on
the receiver.
2 Prepare the component for
playing.
For example, insert the video tape you
want to copy into the VCR.
3 Prepare the recording
component.
Insert a blank video tape, etc. into the
recording component (VIDEO 1 or
VIDEO 2) for recording.
4 Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the sources component.
• The audio signals input to the MULTI CHANNEL
INPUT jacks are output only from the L/R sound of
FRONT.
Recording on recording media
1