Filter
Top Products
44
GB
E:\STR-DA7100ES\2320745143\2320745143STRDA7100ESUC\01GB-
STRDA7100ESUC\030CON.fm
masterpage: Left
STR-DA7100ES
2-320-745-14 (3)
5: Connecting the AC
power cord
Connect the supplied AC power cord to the AC
IN terminal on the receiver, then connect the
AC power cord to a wall outlet.
* A several space is left between the plug and the
rear panel even when the power cord is inserted
firmly. The cord is supposed be connected this
way. This is not malfunction.
** The configuration, shape, and number of AC
outlets will vary according to the area code of
receiver’s you purchased.
Notes
• The AC OUTLET(s) on the rear of the receiver is a
switched outlet, which supplies power to the
connected component only while the receiver is
turned on.
• Make sure that the total power consumption of the
component(s) connected to the receiver’s AC
OUTLET(s) does not exceed the wattage stated on
the rear panel. Do not connect high-wattage
electrical home appliances such as electric irons,
fans, or TVs to this outlet. This may cause a
malfunction.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
1 Press ?/1 to turn off the
receiver.
2 Hold down ?/1 for 5 seconds.
“ENTER to Clear ALL” appears on the
display for 10 seconds.
AC power cord
(supplied)
*
AC OUTLET**AC IN terminal
To the wall outlet
Performing initial setup
operations
1,2
3