Sony STR-DA7100ES Stereo Receiver User Manual


 
135
GB
E:\STR-DA7100ES\2320745143\2320745143STRDA7100ESUC\01GB-
STRDA7100ESUC\090ADD.fm
masterpage: Right
STR-DA7100ES
2-320-745-14 (3)
Additional Information
PROTECTOR/CHECK CODE 13
The power section is overheated. Check that
the ventilation hole is not covered. Turn off
the receiver, leave the receiver for a while,
and turn on the power again.
PROTECTOR/CHECK CODE 14
Turn off the receiver, check the central core
of a speaker cord is not touching the receiver
or other speakers, and turn on again.
PROTECTOR/CHECK CODE 21
Turn off the receiver and consult your
nearest Sony dealer.
PROHIBITED/CHECK CODE 71
The receiver cannot output the sound due to
the copyright protection.
UNKNOWN SIGNAL/CHECK CODE 72
The receiver is not compatible with the
format of the input signal.
BUSFULL/CHECK CODE 73
Since the i.LINK bus is busy with other
connected component’s output signals,
audio signals cannot be connected.
Stop sending output signals from
connected components (Turn off the
component or press the STOP button,
etc.). Press i.LINK on the receiver, then
select the player again.
LOOP CONNECT/CHECK CODE 74
i.LINK connection is caught in a loop.
Check the connection (page 29).
Reference sections for clearing
the memory
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code UC only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 170 watts per channel
minimum RMS power, with no more than
0.15% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Models of area code UC, TW:
POWER OUTPUT
Rated Power Output at Stereo Mode
1)
(8 ohms 20 Hz – 20 kHz,
THD 0.15%):
170 W + 170 W
Reference Power Output at Stereo Mode
(4 ohms 20 Hz – 20 kHz,
THD 0.15%):
170 W + 170 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz,
THD 0.15%)
FRONT
2)
: 170 W + 170 W
CENTER
2)
: 170 W
SURR
2)
: 170 W + 170 W
SURR BACK
2)
: 170 W +
170 W
Reference Power Output
(4 ohms 20 Hz – 20 kHz,
THD 0.15%)
FRONT
2)
: 170 W + 170 W
CENTER
2)
: 170 W
SURR
2)
: 170 W + 170 W
SURR BACK
2)
: 170 W +
170 W
Models of area code CEL, KR, CN:
POWER OUTPUT
Rated Power Output in Stereo Mode
1) 2)
(8 ohms 1 kHz, THD
0.7%):
170 W + 170 W
To clear See
All memorized settings page 44
Customized sound fields page 101
continued