Filter
Top Products
60
GB
E:\STR-DA7100ES\2320745143\2320745143STRDA7100ESUC\01GB-
STRDA7100ESUC\050AMP.fm
masterpage: Left
STR-DA7100ES
2-320-745-14 (3)
Audio input modes
• AUTO 2CH
When there are no digital audio signals, the
analog audio signals input to the AUDIO IN
(L/R) jacks are selected.
• COAXIAL FIXED
Specifies the digital audio signals input to
the DIGITAL COAXIAL jack.
• OPTICAL FIXED
Specifies the digital audio signals input to
the DIGITAL OPTICAL jack.
• ANALOG 2CH FIXED
Specifies the analog audio signals input to
the AUDIO IN (L/R) jacks.
• i.LINK FIXED
Specifies the audio input to the i.LINK
jacks.
• HDMI FIXED
Specifies the audio input to the HDMI jacks.
Notes
• You cannot select the digital audio input assigned
to another function using the DIGITAL ASSIGN
function (page 61).
• Some audio input modes may not be set up
depending on the input.
• A INPUT MODE button does not work when
i.LINK or HDMI input are selected.
Naming inputs
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for attaching component
names. It will tell you which component is
connected to which jack.
1 Press INPUT SELECTOR to
select an input you want to
create an index name for.
You can also use INPUT SELECTOR on
the receiver.
2 Press MAIN MENU repeatedly
to select “CUSTOMIZE,” then
press the control key.
You can also use MAIN MENU on the
receiver.
3 Move the control key to V/v
select “NAME IN?.”
You can also use MENU on the receiver.
4 Press the control key.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name.”
1
2
2,3,
4