Filter
Top Products
27
GB
E:\STR-DA7100ES\2320745143\2320745143STRDA7100ESUC\01GB-
STRDA7100ESUC\030CON.fm
masterpage: Right
STR-DA7100ES
2-320-745-14 (3)
Getting Started
Notes on playing a Super Audio
CD disc on a Super Audio CD
player
• No sound is output when playing a Super
Audio CD disc on a Super Audio CD player
connected to only the SA-CD/CD OPTICAL
or SA-CD/CD COAXIAL IN jack on this
receiver. When you play a Super Audio CD
disc, connect the player to the MULTI
CHANNEL INPUT or SA-CD/CD IN jack.
Refer to the operating instructions supplied
with the Super Audio CD player.
• You cannot make digital recordings of a
Super Audio CD disc. Use the analog jack
for recording in this case.
• When connecting optical digital cords, insert
the plugs straight in until they click into
place.
• Do not bend or tie optical digital cords.
If you want to connect several
digital components, but cannot
find an unused input
See “Listening to digital sound from other
inputs (DIGITAL ASSIGN)” (page 61).
Tips
• All the digital audio jacks are compatible with 32
kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
• You can also connect an LD player with a DOLBY
DIGITAL RF OUT jack via an RF demodulator
(You cannot connect an LD player’s DOLBY
DIGITAL RF OUT jack directly to this unit’s
digital input jacks). Refer to the operating
instructions supplied with the RF demodulator.