Filter
Top Products
33
REC ERR :
The recording is not correctly done. Place
the recorder at no vibration and record
again.
The disc is dirty (with oil stainer finger
prints), scratched, or out of standard.
Record again with another disc.
READ ERR :
The recorder cannot read the disc
information correctly. Reinsert the disc.
SORRY :
You tired to set Digital Sound Preset
while the “AUDIO OUT” parameter is set
to “LINE OUT”. Use the jog dial to set
the “AUDIO OUT” parameter to
“HeadPhone”.
You tried to erase a track mark while
playing the MD or at the beginning of the
first track.
You tried to erase a track mark to combine
tracks the recorder cannot combine (a
track recorded in different recording
mode such as in LP2 and LP4, or a track
recorded through analog connection and
digital connection)*.
You tried to overwrite a track mark.
You tried to press
X, T MARK or REC
MODE while synchro-recording or the
joint text function is active.
* If you have recorded or erased many times
on the same MD, the data of a single track
may be scattered throughout the MD.
When the data is scattered in groups of less
than 12 seconds long, the recorder will not
be able to combine the tracks.
TEMP OVER :
Heat has built up in the recorder. Wait
until the recorder cools down.
TOC Edit :
The MD recorder is recording
information (track start and end position)
from the memory to the disc. Wait until
this process is completed. Do not expose
the recorder to physical shock, nor disrupt
power supply.
TOC ERR :
The recorder cannot read the disc
information correctly. Insert another disc.
If it is no problem to erase all the contents
of the disc, erase all (page 113).
TR FULL:
You tried to record more than 254 tracks.
TrPROTECT :
You tried to record over or edit a track
which has been protected from being
recorded over*.
* Track-protected MiniDiscs — Some MD
recorders will let you protect individual
tracks from being recorded over. This
recorder, however, does not offer this
feature.